Custom solutions to meet your gearing requirements

NU LOBE™

Our gearboxes are constructed using NU LOBE™ gears, which optimize the roller gear profile. These gearboxes are up to 50 percent lighter and able to pack more torque in less space.

Adapters

Our Adapters weigh as little as 10 lbs. with a maximum at 30 lbs., and we are developing them for NEMA (National Electrical Manufacturers Association) configurations. IEC (International Electrotechnical Commission) configurations can be made as specials. Pictured here is our latest model featuring a flex-frame adapter.

DTAP

Answer just a few quick questions here and we will work together to design a gearbox that will work in most motion control applications.

GHP Series Planetary Gearheads

The GHP Series can be modified to create high reduction gearheads. Ratios can reach 1000:1 and higher. These high ratio units use small motors and the adapters conveniently furnish the appropriate configuration to mount them.

The GHP Series fit NEMA (National Electrical Manufacturers Association) configuration motor frames from 1/4 through 30 horsepower and extend motor housings as little as 2.5 inches.

    This line features:
  • Compact, aluminum housings
  • Heat treatable output shafts
  • Outstanding overhung load capacities
  • Lightweight, high density, no jackshafts
  • Well balanced, perform at high speeds
  • Inputs keyed to the motor shafts, outputs duplicate NEMA configurations


This product uses roller gears, is shock load resistant, offers premium weight-to-torque ratio, is cost effective and easily modified.

This product series is available in 5:1, 4:1, and 3:1 ratios for single stage and 9:1 up to 125:1 for double and triple stage.

GHP Series

GHP20 TWO STAGE
NEMA 56C FRAME GEARHEAD

 
 
 

Model
GHP20-9
Ratio
9:1
HP
2.0
Output Torque @1750 RPM Input In-lb
564.0
Eff. %
87.0
Wt. Lbs.
14.25
Model
GHP20-12
Ratio
12:1
HP
1.5
Output Torque @1750 RPM Input In-lb
533.0
Eff. %
87.0
Wt. Lbs.
14.25
Model
GHP20-17
Ratio
17:1
HP
1.0
Output Torque @1750 RPM Input In-lb
533.0
Eff. %
87.0
Wt. Lbs.
14.25
Model
GHP20-25
Ratio
25:1
HP
0.75
Output Torque @1750 RPM Input In-lb
587.0
Eff. %
87.0
Wt. Lbs.
14.25



GHP21
NEMA 56C FRAME GEARHEAD

These gearboxes can be mounted to NEMA C-Face motors with the appropriate adapter. They can also be foot mounted with the proper flanges. These are supplied by Gearing Solutions.

Model
GHP21-3
Ratio
3:1
HP
2.5
Output Torque @1750 RPM Input In-lb
254.0
Eff. %
94.0
Wt. Lbs.
11.25
Model
GHP21-4
Ratio
4:1
HP
2.5
Output Torque @1750 RPM Input In-lb
339.0
Eff. %
94.0
Wt. Lbs.
11.25
Model
GHP21-5
Ratio
5:1
HP
2.5
Output Torque @1750 RPM Input In-lb
419.0
Eff. %
93.0
Wt. Lbs.
11.50



GHP30
Face Mounted Gearbox

These gearboxes can be mounted to NEMA C-Face motors with the appropriate adapter. They can also be foot mounted with the proper flanges. These are supplied by Gearing Solutions.

Model
GHP30-3
Ratio
3:1
HP
12.0
Output Torque @1750 RPM Input In-lb
1232.0
Eff. %
95.0
Wt. Lbs.
25.25
Model
GHP30-4
Ratio
4:1
HP
12.0
Output Torque @1750 RPM Input In-lb
1625.0
Eff. %
94.0
Wt. Lbs.
25.25
Model
30-5
Ratio
5:1
HP
10.0
Output Torque @1750 RPM Input In-lb
1693.0
Eff. %
94.0
Wt. Lbs.
25.25

GHP32
FACE MOUNTED GEARBOX

These gearboxes can be mounted to NEMA C-Face motors with the appropriate adapter. They can also be foot mounted with the proper flanges. These are supplied by Gearing Solutions.

Model
GHP32-3
Ratio
3:1
HP
24.0
Output Torque @1750 RPM Input In-lb
2463.0
Eff. %
95.0
Wt. Lbs.
29.50
Model
GHP32-4
Ratio
4:1
HP
24.0
Output Torque @1750 RPM Input In-lb
3250.0
Eff. %
94.0
Wt. Lbs.
29.50
Model
GHP32-5
Ratio
5:1
HP
20.0
Output Torque @1750 RPM Input In-lb
3385.0
Eff. %
94.0
Wt. Lbs.
29.50


Adapters

Our Adapter line includes both Motor and Shaft Adapters. Accepts IEC (International Electrotechnical Commission) or NEMA (National Electrical Manufacturers Association) configurations. Contact us for information about our Shaft Adapters.

Motor Adapters Whether designing drives for easy maintenance, quick conversion or minimum inventories, NEMA gearheads should be considered. We have taken advantage of minimum axial dimension in designing this adapter module. The combined unit’s L dimension remains the lowest in the industry. Our Adapters are lightweight, sturdy, and easy to mount. The housing unit will fit into both the foot and flange mount. By combining our Adapters with our GHP Planetary line, design engineers can create NEMA gearheads.

Model
ADP 0001
Flange A
NEMA 56 → NEMA 184
Flange B
NEMA 56 → NEMA 184
Model
ADP 0002
Flange A
NEMA 182T → NEMA 256T
Flange B
NEMA 182T → NEMA 256T
Model
ADP 0003
Flange A
NEMA 56 → NEMA 184
Flange B
NEMA 182T → NEMA 256T
Use suffix B for 45 degree offset. At least four additional sizes can be accessed through our DTAP [link to DTAP page] program.





Modified Units

The GHP Series can be modified to create high reduction gearheads. Ratios can reach 1000:1 and higher.

Modified units allow for unique designs, and can be customized to specify: housing dimension and bolt, patterns, input and output shafts, and size. An example is below.

Gearing Solutions Modified Units
 
Gearing Solutions Modified Units




Aluminum Housings

Our chain-based internal gears are mounted in lightweight aluminum housings that allow for design flexibility (easy to change the number of pitches) and competitive short run pricing. In addition, the chain spreads the force over the entire 360 degrees and the rollers act as miniature journal bearings, thereby increasing load capacity. Also a weight savings of up to 50 percent can be achieved.





Address

5905A Harper Road
Solon, OH 44139

Telephone:
+1 440-498-9538
E-mail:
info@gearingsolutions.com
Get in touch
Contact form submitted.